You can save a lot of money by working on your own vehicle as mechanics charge a lot. Answered on Apr 26, 2018 My friend is a part time mechanic he gets his solutions from he gets from their every single detailed info, instructions etc. Do not remove ice from the mirrors with a scraper or attempt to readjust the mirror glass if it is frozen in place. Allow the safety belt to retract to remove any slack in the belt. Automatic transmission fluid dipstick 4. Replace the spark plugs with ones that meet Ford material and design specifications for your vehicle, such as Motorcraft or equivalent replacement parts. Reinstall lug nuts until the wheel is snug against the hub.
Do not turn the steering wheel too sharply while returning to the road surface. Ford or Mercury vehicles customers call 1-800-241-3673; Lincoln vehicle customers call 1—800—521—4140. If the warning stays on after the park brake is off, contact your dealer as soon as possible. Your vehicle has what is called coil on plug ignition system , a coil for each cylinder. Use only fluid that meets Ford specifications.
Refer to Adding engine oil in this chapter. To install, press the lamp assembly into liftgate. Pull the bulb out from the socket and push in the new bulb. Push the cushion to the inboard side of the vehicle. Refer to the diagram inside the remote entry transmitter for the correct orientation of the battery.
These may include hot wax treatments used by commercial car washes, tree sap, or other organic contamination. The Dolby noise reduction system is manufactured under license from Dolby Laboratories Licensing Corporation. Depress the clutch, then shift into 1 First. Manufacturer identification is located at the end of the webbing on the label. Over time the adaptive learning process will fully update transmission operation to its optimum shift feel. Position the child safety seat in a seat with a combination lap and shoulder belt. The passenger safety belts have two types of locking modes described below: Vehicle sensitive mode This is the normal retractor mode, which allows free shoulder belt length adjustment to your movements and locking in response to vehicle movement.
As the belt retracts, you will hear a clicking sound. Also, use the safety belt extension only if the safety belt is too short for you when fully extended. For more information on brake fluid maintenance, refer to Brake fluid in this chapter. Remove the tools from the jack in order to remove the spare tire from under the vehicle. Use of any tire or wheel not recommended by Ford can affect the safety and performance of your vehicle, which could result in an increased risk of loss of vehicle control, vehicle rollover, personal injury and death.
You may lose control if you do not slow down or if you turn the steering wheel too sharply or abruptly. Never drive through water that is higher than the bottom of the hubs for trucks or the bottom of the wheel rims for cars. Attach the safety belt web snap button to the quarter trim panel snap button. Detailed Satellite instructions are included with the dealer installed kit. For additional information, refer to Understanding the gearshift positions of the 4—speed automatic transmission in the Driving chapter. Several air bag system components get hot after inflation. Utility vehicles and trucks are not designed for cornering at speeds as high as passenger cars any more than low-slung sports cars are designed.
The fuel system may be under pressure. Your radio comes equipped with Satellite ready capability. Pull lever up to adjust seatback. This may consist of cornstarch, talcum powder or sodium compounds which may irritate the skin and eyes, but none of the residue is toxic. Use of synthetic or synthetic blend motor oil is not mandatory. Do not park your vehicle in Neutral, it may move unexpectedly and injure someone.
Service emission sys Check fuel cap Low brake fluid Service brake system Check left headlamp Check right headlamp Check left high beam Check right high beam Check left turn lamps Check right turn lamps Engine change oil soon. Lower the jack from its stored height to fit under the jacking notches. Slide the cross-bar to the desired location. Only use a washer fluid that meets Ford specifications. Stop the vehicle as soon as safely possible, switch off the engine and let the engine cool.